Model A10160

• 45MHz bandwidth 
• High amplitude to 34Vp-p into 50Ω
• High output current drive to 1A
• Fast transition time of <10ns
• Small footprint, all metal case 
• Custom gain configuration
• Low distortion

Enhancing Performance

The A10160 was designed as a “Snap-On” accessory for the Tabor WaveXciter series and models WS8351/2, both having a maximum amplitude of 4Vp-p, which can be limiting for some applications, requiring higher voltage and current to drive their UUT. Combined with the A10160 the WX and WS models will now offer even higher abilities to solve demanding application requiring up to 45MHz signals at 34Vp-p into 50 ohms loads, without compromising their signal integrity.

High Current High Power

With a peak output current of 1A and 750mA continuous the A10160 enables a continuous power output of 7.5W, and a peak output power of up to 10W, making it ideal for various pulse applications.

Cost Effective Versatile Solution

While the A10160 was designed with the Tabor units in mind, it can be used as a standalone amplifier for any signal source. The A10160 offers a compatible, compact and cost effective solution for extending any signal source’s power performance.

Optional Configurations

The A10160’s standard configuration enables a maximum output voltage of 34Vp-p into 50 ohms with a gain of x10. Other custom gain, such as x15 or x20 can be ordered at the time of the purchase, enabling clients’ even wider variety of choices to solve their application.

Target Applications

While target applications include piezo-electronics, transducer characterization, MEMS, general electronics and scientific applications, the new A10160 is an ideal solution for virtually any wide bandwidth application that requires high voltage and high current amplification.

Options

⁽¹⁾ Standard configuration.

Note: Options must be specified at the time of your purchase.